This function is also useful when using the cursor to measure a distance between two elements on the screen. Always supplement the electronic information provided by this instrument with other plotting sources such as observations, depth soundings, radar and hand compass bearings. Zoom bars By default the zoom level is set to 2x. ¼ ¼ Note: Minor adjustments can be made by tapping above or below the slider bar. Installation settings Keel offset This is a value that can be entered on the sonar Installation page to make depth readings relate to any point from the water surface, to the deepest point of the vessel. When in Standby mode, the sonar and the backlight for touchscreen and keys are turned off to save power. Tap Save on the waypoint dialog to create the waypoint.Next
A night mode which optimizes the color palette for low light condi- tions, is included. Using the touchscreen Basic touchscreen operation on the different pages is shown in the table. Steer page The Steer page can be used to display information when you are navigating. ¼ ¼ Note: When the cursor is active, some features on page menus will be replaced with cursor mode features. Surface Water Temperature Yes- Available built into transducer or via external network. Access the hidden system menu 2.
The StructureScan page is accessed from the shortcut icon on the homescreen when the StructureScan transducer is connected. Why order your Instruction Manual from Manuals Ink. The blue scroll bar shows the image you are currently viewing in relation to the total sonar history stored. A virtual keyboard is operated by tapping the virtual keys. Contrast has no set preference.Next
When the cursor is active, the screen will be zoomed at the cursor location. The clarity option reduces surface clutter by decreasing the sensitivity of the receiver near the surface. Tap Clear and tap Save Data Overlay Allows you to overlay information on the active page. Preview You can have all available downscan history shown at the top of the structure page. Structure settings StructureScan and sonar use the same settings menu.Next
Contrast Adjusts the brightness ratio between light and dark areas of the screen, making it easier to distinguish objects from the background. Panning You can pan the chart, sonar and structure screens by dragging your finger in any direction. Repeated short presses toggles through favorite pages. You can scroll through sonar history by dragging the preview slider horizontally. On the Sonar page, the cursor information window will include the corresponding surface temperature and the depth at the cursor position.Next
A long press opens the Find menu. Adjusting Sensitivity and Colorline Sensitivity and Colorline are adjusted by dragging the slide bar vertically. Tap the screen to activate the cursor on the chart, sonar, structure and radar pages. Refer to the Utilities section of this manual for information on viewing screen captures and saving files t Summary of the content on the page No. When Overlay downscan is activated, the sonar menu will expand to include basic Structure options. Pages, quick splits and favorites are all accessed from the homescreen.
Sonar logs can be viewed by tapping View sonar log on the Sonar settings menu. Ping speed The Ping Speed controls the rate the transducer transmits into the water. Slide bar Dropdown menu Page menus Page menus for each operation mode are on the right side of the screen. Advanced Noise rejection Signal interference from bilge pumps, engine vibration and air bubbles can clutter the sonar screen. First time startup The device configuration dialog appears when you start up the unit for the first time.Next
The slide bar is accessed by tapping Sensitivity or Colorline on the Sonar menu. Summary of the content on the page No. You will make adjustments using the Overlay slider bar. Range lines Range lines extend from the range scale to the other side of the screen, making it easier to estimate depth DownScan and distance SideScan. Network StructureScan If you have more than one StructureScan system on your network, you can select which unit will be the preferred data source. Tap Save Customizing overlay data You can toggle the overlay data type between an analog and digital display, select data size, and change previously configured data from the Edit overlay configuration menu. It is easier to use the measure function when the structure image is paused.Next