Transas navi-sailor 4000 ecdis user manual. TRANSAS Navi

Transas navi-sailor 4000 ecdis user manual Rating: 8,5/10 1181 reviews

Transas Navi

transas navi-sailor 4000 ecdis user manual

The system date should be moved back to August 2009 in order for the license to be applied. If the device is to be shut down after a specific time has elapsed, the time can be set via the selector switch 13 on the front of the device. View of Battery modules Safety and Warning Notes In order to guarantee safe operation of the device, please read these instructions thoroughly! You can check the running configuration. Connection to all navigational sensors and external devices required for the operation in Master mode. Switch to “Chart collections” page: – In. Select “System Settings” from the fall-off list.

Next

Transas Navi

transas navi-sailor 4000 ecdis user manual

With chart editor it is possible to enter text information on the chart such as: report points, pilot connection points etc. Chinese charts are the most outdated. When you receive an e-mail from chartservice transas. When access covers are removed, lethal voltages may be exposed. View of slim-style position – Assembly. Ethernet ports isolation drawing Annex D. Port of Entry Information Gives information about the ports.

Next

TRANSAS NAVI

transas navi-sailor 4000 ecdis user manual

Really nice night mode configuration. Ships manning offices; it can be guaranteed that officers would be trained according to the rules. Node number is selectable 0–7 by jumpers Configuration switch. Adjust “Track control” section in System Configuration utility as per settings specified for the given ship type. While creating the sentence structure, the user sets the criterion for checking the correctness of the sentence, which is being received.

Next

Transas: Navi

transas navi-sailor 4000 ecdis user manual

Commissioning Table Creation Press Commissioning Table button: Chapter 2. If the loading continues, perform the restart by using the Reset button. The data required for the trail maneuver is entered in the window for the maneuver parameter input. One of Navi-Connings benefits is the flexibility to meet the bespoke requirements of each customer and to provide optimal information layout for different work situations. This Russian made program can be downloaded on most of the Russian websites and forums, make sure you translate the page prior to downloading to avoid confusion. Click on “Configuration” icon: 29. Main Press “Start” button of the menu and select “Run” line.


Next

Transas 4000 ECDIS

transas navi-sailor 4000 ecdis user manual

For printing configuration type “printenv” and press button: 7. Some external links may contain spyware, viruses almost certainly contains bugs, errors, and omissions. Use the appropriate tab in the top left corner of the screen to switch to “Ship Collection”. If external device is not connected, the page will be blank;. The parameter is added to the table. Battery modules mounting brackets dimensional drawing Chapter 3. The configuration will be restored.

Next

Transas NS4000 ECDIS

transas navi-sailor 4000 ecdis user manual

Transverse water speed Stern transverse water speed Stern transverse ground speed 2. One is required for each buscoupler. The serial extension board has three Dsub connectors see figure below : •. The chassis is not rack mountable. The Radar Processor’s serviceability is restored on the ship, in the port or at a plant by replacing it with a new unit bought from the manufacturer. Animated weather overlay providing data such as swell, wind direction and significant wave height over a 5-day forecast.

Next

TRANSAS NAVI

transas navi-sailor 4000 ecdis user manual

The system interacts with various databases to automatically extract the relevant information needed for the plan. Select component “Transas Integrator” and set option “This feature will be installed on local hard drive”. Parameters Deletion Messages and parameters group, select a sentence whose parameter is required to be edited, and press Parameters button:. Local alarm condition and status. Information System and Decision Support A continual flow of information for presentation of the crucial and most needed navigational information and objects.

Next

Transas Navi

transas navi-sailor 4000 ecdis user manual

Connectors layout” enclosed in of this document. Input of new sentence and its parameters in the databases is completed. Orientation by the compass heading. External group press call button to the right of the window and specify the path to the folder with new configuration file Copy Press button in the utility toolbar. Safe way to do it is to move the date back to 2008 but be careful to mind the leap year on February.

Next

Transas Navi

transas navi-sailor 4000 ecdis user manual

Following successful installation, the capacity of the connected battery module must be selected using the “Battery module selection” rotary switch 14. Transas offers the most advanced category C complete route with controllable turn. All the aforementioned applications are running simultaneously as part of the Multifunction Display. Please report bad or deleted links. Therefore, the specified contact will be closed by trackball movement with resetting the “Dead Man”.

Next

TRANSAS NS4000 OPERATION MANUAL.pdf

transas navi-sailor 4000 ecdis user manual

Press Navigation program would not start or has hung up at the start button: Press Restore button. In the input boxes set the minimum and maximum parameter values. By default, the list contains 6 groups. The floating signal contact opens and signalizes a drop in the output voltage as set of more than 10%. It completes the internal data circuit and ensures correct data flow.

Next